Charnwood Country 4 Airwash Slide - 004/EY48

(Delivery usually within 3-5 days)
SKU
004-EY48
£47.40
  • Available for Delivery or Click & Collect (Neyland, Pembrokeshire)
  • Select option at checkout
  • We will Text you when its ready (Click & Collect)
Quality Spares at LOW prices - Stove Spares Ltd
.

Charnwood Country 4 Airwash Slide - 004/EY48

 

The Charnwood Country 4 Airwash Slide is designed to allow and restrict air flow into the stove to keep the glass clean.  The Country 4 airwash slider is used by simply sliding the arm in and out of the stove therefore regulating how much air is taken in to the stove and flushed down over the glass.

 

The Charnwood Country 4 air slide is genuine Charnwood spare that is easy to fit and all that is required is a 13mm open ended spanner.

 

 

Installation Instructions

Installation Instructions:


Installing the Charnwood Country 4 Airwash slide is extremely easy and can be completed in around 5-10 minutes.

 

  • Fully extend the Airwash control and unscrew the brass knob.
  • Locate and remove the two support bracket nuts (8mm) and washers holding the airslide in place.
  • Working from inside the airwash manifold, draw the airslide towards you until the support brackets clear their mounting holes.  Lower the left hand to clear the airwash manifold and slide the rod end bar out of its slot.
  • Insert the rod end bar through its slot in the side of the stove and locate the two support brackets through the holes in the airwash manifold .
  • Replace the washers, nuts and the Airwash control knob.
Write Your Own Review
You're reviewing:Charnwood Country 4 Airwash Slide - 004/EY48
Your Rating

Fire Brick Warranty Information:

Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers.  Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate.

When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired.  Bricks can still be used if cracked.  As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way.

Fore more information please read our full warranty and Tips guide -> CLICK HERE

By placing an order for firebricks you accept these conditions.

Back to Top