Clearview Pioneer 400P Door Rope Seal Kit - P40CP040

In stock
SKU
P40CP040-400P
£28.95
  • Available for Delivery or Click & Collect (Neyland, Pembrokeshire)
  • Select option at checkout
  • We will Text you when its ready (Click & Collect)
Quality Spares at LOW prices - Stove Spares Ltd
.

Clearview Pioneer 400P Door Rope Seal Kit - P40CP040

Replacement rope kit suitable for the Clearview Pioneer 400P stove.

 

Please note: This kit is an aftermarket rope kit so will not arrive in Clearview packaging.  The rope is 100% fully tested by us and many chimney sweeps.  You will receive a slightly longer than required length to avoid the issue of the rope retracting/shrinking in the packet. We will supply fireproof end seal tape so you can seal the end you cut to stop the rope freying and silicone seal also. 

Write Your Own Review
You're reviewing:Clearview Pioneer 400P Door Rope Seal Kit - P40CP040
Your Rating

Fire Brick Warranty Information:

Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers.  Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate.

When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired.  Bricks can still be used if cracked.  As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way.

Fore more information please read our full warranty and Tips guide -> CLICK HERE

By placing an order for firebricks you accept these conditions.

Back to Top