Clearview Solution 500 Set Of Fire Bricks - P50CR030S

In stock
SKU
P50CR030S
£55.00
  • Available for Delivery or Click & Collect (Neyland, Pembrokeshire)
  • Select option at checkout
  • We will Text you when its ready (Click & Collect)

Quality Spares at LOW prices - Stove Spares Ltd

.

Clearview Solution 500 Set Of Fire Bricks - P50CR030S

 

The Clearview Solution 500 Full set of fire bricks is a high quality Vermiculite set of boards used to line the inside of the stoves firebox to improve insulation and to protect the internal walls fromm excessive heat.

The Fire brick set consists of 3 bricks:

1 x Rear Fire Brick
2 x Side Fire Bricks

 Please Note: The Fire bricks within this set is an aftermarket set manufactured from an upgraded higher density British board to exact specificiations.

 

Installation Instructions

Installation Instructions:


Installing the Clearview Solution 500 Fire brick set is extremely easy and can be completed in around 5-10 minutes.

 

  • Remove the Throat plate and Fuel Retainer.  The baffle can be removed by simply lifting the baffle to the roof of the stove and bringing it down into the fire box at and angel.
  • Carefully remove the bricks, taking the side bricks out first..
  • Replace the new bricks installing the rear brick first.
  • inset baffle at an angle and lift to the roof of the stove and carefully place on top of the fire bricks.
Write Your Own Review
You're reviewing:Clearview Solution 500 Set Of Fire Bricks - P50CR030S
Your Rating

Fire Brick Warranty Information:

Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers.  Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate.

When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired.  Bricks can still be used if cracked.  As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way.

Fore more information please read our full warranty and Tips guide -> CLICK HERE

By placing an order for firebricks you accept these conditions.

Back to Top