Franco Belge Door Handle Cam Pin - 100917
- Available for Delivery or Click & Collect (Neyland, Pembrokeshire)
- Select option at checkout
- We will Text you when its ready (Click & Collect)
Franco Belge Door Handle Cam Pin - 100917
The Franco Belge Door Handle Cam Pin is a specialist screw that secures the cast iron door handle (301526) to the body of the stove. The Cam Pin Screw is easy to replace and takes only a few minutes.
Installation Instructions:
Installing the Franco Belge Cam Pin is extremely easy and can be completed in around 1-2 minutes.
- Remove old Cam Screw and clean out any excess dirt or grime in the hole that joins the screw to the body.
- Carefully apply some copper grease to the thread of the new Cam Pin.
- Carefully place the door handle in position and gently screw the cam pin in until tight (Avoid over-tightening as it will expand on firing)
- Test the door handle to ensure it opens and closes smoothly..
Fire Brick Warranty Information: Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers. Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate. When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired. Bricks can still be used if cracked. As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way. Fore more information please read our full warranty and Tips guide -> CLICK HERE By placing an order for firebricks you accept these conditions. |