Franco Belge Door Glass Seal/Gasket Kit - 181632

In stock
SKU
181632
£8.95
  • Available for Delivery or Click & Collect (Neyland, Pembrokeshire)
  • Select option at checkout
  • We will Text you when its ready (Click & Collect)
Quality Spares at LOW prices - Stove Spares Ltd
.

Franco Belge Door Glass Seal/Gasket Kit - 181632

 

The Franco Belge door glass seal is a soft self adhesive soft rope that sticks to the casting of the door and then once fixed the glass simply presses up against the seal to ensure a perfect seal between the glass and the body of the stove.

Please Note: Sometimes in transit the adhisive may appear to have come away from the rope.  Simply press tape back to the rope and the adhesive will adhere again.  Once the rope is installed and heated the glue will set strong.

 

Compatibility:

Montfort Classic
Montfort Elegance (MK2)
Monaco
Savoy Classic
Savoy Elegance
Belfort

 

 

Installation Instructions

Installation Instructions:


Installing the Franco Belge Door Glass Seal/Gasket Kit - 181632 is extremely easy and can be completed in around 5 minutes.

 

  • Remove the existing glass retainers/glass clips and carefully remove the glass.
  • Clean the of any old adhesive and dust/grime to ensure the adhesive can stick properly .
  • Peel off the rear backing from the rope carefully to ensure you do not remove the glue and place around the internal casting area where the glass would sit.
  • Once your happy replace the glass and retainer clips ensuring you do not over tighten the screws .
Write Your Own Review
You're reviewing:Franco Belge Door Glass Seal/Gasket Kit - 181632
Your Rating

Fire Brick Warranty Information:

Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers.  Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate.

When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired.  Bricks can still be used if cracked.  As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way.

Fore more information please read our full warranty and Tips guide -> CLICK HERE

By placing an order for firebricks you accept these conditions.

Back to Top