Replacement Fire Bricks For Charnwood Island 2 (MK1)
Quality Spares at LOW prices - Stove Spares Ltd
Replacement Fire Bricks For Charnwood Island 2 (MK1)
Â
The Replacement Fire Bricks For Charnwood Island 2 (MK1) consists of 4 fire bricks for the Island 2 and comes complete with instructions on how to fit.
Â
Please Note: Suitable for Charnwood Island 1 stoves with serial number Upto 2657.
Â
Â
Installation Instructions:
Installing the Charnwood Island 2 Set of Fire bricks is extremely easy and can be completed in around 5-10 minutes.
Â
- Remove the Throat plate , Fuel Retainer and any side and rear plates from the stove.
- Before Removing the original bricks take note of the position in which they are fitted.
- Remove original bricks and ensure any old adhesive is cleaned off the stoves body. For stubborn adhesive you may need to use a wire brush.
- Apply a small amount of silicone (Supplied) around the edges of the bricks and push them into position.
- Fit support brackets back into position (If applicable).
- Once fitted leave for a few hours before lighting for the silicone to set.
|
Fire Brick Warranty Information: Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers. Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate. When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired. Bricks can still be used if cracked. As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way. Fore more information please read our full warranty and Tips guide -> CLICK HERE By placing an order for firebricks you accept these conditions. |
