The Charnwood Country 6 Airwash Slide is designed to allow and restrict air flow into the stove to keep the glass clean. The Country 6 airwash slider is used by simply sliding the arm in and out of the stove therefore regulating how much air is taken in to the stove and flushed down over the glass.
The Charnwood Country 6 air slide is genuine Charnwood spare that is easy to fit and all that is required is a13mm open ended spanner.
Installing the Charnwood Country 6 Airwash slide is extremely easy and can be completed in around 5-10 minutes.
Fully extend the Airwash control and unscrew the brass knob.
Locate and remove the two support bracket nuts (8mm) and washers holding the airslide in place.
Working from inside the airwash manifold, draw the airslide towards you until the support brackets clear their mounting holes. Lower the left hand to clear the airwash manifold and slide the rod end bar out of its slot.
Insert the rod end bar through its slot in the side of the stove and locate the two support brackets through the holes in the airwash manifold .
Replace the washers, nuts and the Airwash control knob.
We Also Recommend
You may also be interested in the following product(s)