The Clearview Pioneer 400 fire brick set is a vermiculite set of 3 bricks consisting of 2 side bricks and a rear brick. the Pioneer 400 brick set is designed to insulate and protect the stove walls from the excessive heat generated by the stove.
Vermiculite has fantastic heat insulation properties and keeps the heat within the firebox for longer and increases the efficiency of the stove. The fire brick set for the Pioneer 400 stove also protects the stove from the continuous heat and its recommended that you change the fire bricks once chunks of the bricks start to come away.
Please Note: If your stove is a Smoke control version (Defra) these bricks and baffle will not fit Please then look for part number
If your stove has a bar running horizontally across the back of the fire box above the existing brick and your air control lever when pushed in does not go under the lip completely then your stove is a Smoke Exempt model and you will require a different set of bricks and baffle. Please contact our team if this is the case.
Installing the Clearview Pioneer 400 brick set is extremely easy and can be completed in around 5-10 minutes.
Remove the Log Retainer.
Remove the Throat plate by lifting the baffle up and bring the baffle down at an angle and our of the stove.
Before Removing the original bricks take note of the position in which they are fitted.
Remove original bricks.
Fit new bricks back into position.
Use spaces to separate tags. Use single quotes (') for phrases.