Clearview Vision 500 Smoke Control Set Of Fire Bricks
Quality Spares at LOW prices - Stove Spares Ltd
Clearview Vision 500 Smoke Control Set Of Fire Bricks - P50CR030S
The Clearview Vision 500 Smoke Exempt stove Full set of fire bricks is a high quality Vermiculite set of boards used to line the inside of the stoves firebox to improve insulation and to protect the internal walls fromm excessive heat.
The Fire brick set consists of 3 bricks:
1 x Rear Fire Brick
2 x Side Fire Bricks
Please Note: The Fire bricks within this set is an aftermarket set manufactured from an upgraded higher density British board to exact specificiations.
The easiest way to check is to look at the rear fire brick and check if directly above the brick there is a steel bar running horizontally across the top of the brick with air holes. If the answer is yes then this is the correct baffle.
**** This is The latest version of the Smoke control stove. Please ensure you check the comment regarding the air bar before purchasing. ****
|
Fire Brick Warranty Information: Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers. Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate. When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired. Bricks can still be used if cracked. As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way. Fore more information please read our full warranty and Tips guide -> CLICK HERE By placing an order for firebricks you accept these conditions. |
