Dunsley Highlander 5 Baffle/Throat Plate

In stock
SKU
SP-H5BP
£42.50
  • Available for Delivery or Click & Collect (Neyland, Pembrokeshire)
  • Select option at checkout
  • We will Text you when its ready (Click & Collect)

Quality Spares at LOW prices - Stove Spares Ltd

.

Dunsley Highlander 5 Baffle/Throat Plate

This replacement baffle is suitable for the Dunsley Highlander 5 stove and is made from thick steel and is designed to sit above the firebricks in your stove.  Replacing the Highlander 5 baffle plate is extremely important if the existing baffle is damaged as continued use with a faulty baffle can cause damaged to the body of the stove.

The Dunsley Highlander 5 baffle is designed to the sit at the roof of the stove and is designed to slow the flames down within the fire box.  Without a baffle the flames would be sucked up the stoves chimney which could damage the chimney and also damage the lid of the stove.  The Dunsley Highlander 5 baffle is a part that takes the most punishment and is an extremely important part of your stove.

Approx Dimensions: 360mm Wide

Installation Instructions:


Installing the Dunsley Highlander 5 baffle/throat plate is extremely easy and can be completed in around 3 minutes.

  1. Rermove the log retainer from the stove.
  2. The baffle can be removed easily without removing the fire bricks - Simply lift the baffle and tilt at an angle and lower into the firebox and out through the front door
  3. Repeat the installation by placing the baffle in at an angle and bringing up to the roof of the stove
  4. Gently lower the baffle ensuring it sits corretly in place.
  5. Give the stove a light firing for the next hour to allow the baffle to settle.
Write Your Own Review
You're reviewing:Dunsley Highlander 5 Baffle/Throat Plate
Your Rating

Fire Brick Warranty Information:

Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers.  Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate.

When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired.  Bricks can still be used if cracked.  As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way.

Fore more information please read our full warranty and Tips guide -> CLICK HERE

By placing an order for firebricks you accept these conditions.

Back to Top