Franco Belge Belfort Vermiculite Fire Brick Set
Franco Belge Belfort Vermiculite Fire Brick Set
The Franco Belge Belfort vermiculite fire brick set is an aftermarket fire brick set designed to replace the existing Clay fire bricks within the stove. We have developed these bricks using vermiculite due to their far superior insulation materials.
Vermiculite holds the heat within the firebox for a longer period compared to Clay bricks. This results in more heat being pushed into the room and giving you a cleaner more efficient burn.
Please Note: These bricks have been fully tested in our own stove to ensure perfect fit and operation. Buy with confidence.
Installation Instructions:
Installing the Franco Belge Belfort brick set is extremely easy and can be completed in around 3-5 minutes.
- Remove the Log Retainer.
- Using the palm of your hand lift the baffle upwards and forward and lower the baffle to the base..
- Now pull the bottom of the baffle towards you and pull the baffle out through the door.
- Now remove the side bricks followed by the rear brick.
- Reverse the sequence to install new bricks.
|
Fire Brick Warranty Information: Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers. Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate. When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired. Bricks can still be used if cracked. As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way. Fore more information please read our full warranty and Tips guide -> CLICK HERE By placing an order for firebricks you accept these conditions. |
