The Franco Belge Monaco baffle plate is made from Cast iron and is designed to sit at the top of the stove and prevents excess heat from escaping too early and also protects the roof of the stove. The Monaco baffle gently rests on the rear fire bricks and is supported by a lip inside the stove. The baffles comes as 2 parts (Main Baffle Part number 323209 & Supplementary baffle Part number 326605).
The Franco Belge Monaco Baffle is easy to fit and under normal firing can last a long time.
Franco Belge Monaco - 134 06 05
Franco Belge Moanco - 124 09 03
Installing the Franco Belge Monaco Baffle Plate is a little tricky but can be completed in around 5 minutes.
1) Remove the log guard. Lift the right side upwards and slide the left side out of the casting on the left then it can then be withdrawn from the stove. 2) Removing the baffle. Lift the baffle upwards, until the small halfmoon support is high enough to pull the bottom towards the front of the stove. It can then be removed from the stove. 3) Remove both side firebricks and rear is changing these also. 4) We recommend that the inside of the stove should be vacuumed clear of ash when this procedure is done and also at the end of the heating season. 5) Now reverse the procedure
We Also Recommend
You may also be interested in the following product(s)
Website is concise and easy to navigate.
After one phone call to confirm I was ordering the correct parts it was a simple exercise ordering and paying on line.
All goods arrived when specified.
A great service. Thankyou