Replacement Back/Rear Fire Brick For Franco Belge Monaco
The Replacement Back/Rear Fire Brick For Franco Belge Monaco which comes in 2 halves and is designed to insulate and protect the internal walls of the firebox. The fire brick will fit either side (Left or Right) and 2 is required for a set.
Please note: Bricks are sold separately
Please Note: Over the years the rear bricks have changed slightly and you may need to purchase the correct rear bricks to ensure that the secondary air holes line up correctly. In order to determine the correct rear bricks you would need to check your model number which would be located on your manual or if accessible on the white stick at the rear of the stove.
Identifying the correct rear brick:
If you do not know the model number you can identify the brick required by measuring the distance of the holes to the bottom of the brick.
Measuring the holes will identify the rear bricks you require. Measuring from the centre of the holes to the bottom of the brick will determine which brick is required. If you measurement is 135mm then you require part number 102041 and if the measurement is 165mm then you require 102044, (see image below)