Door Glass Seal Kit for Morso O4
Door Glass Seal Kit For The Morso O4 stove
Self adhesive flat tape that is suitable for the Morso O4 range of stoves.. The Morso O4 rope seal kit provides 2 Meters of self adhesive rope and is designed to sit under the glass to provide protection of the glass and to create an airtight seal.
Installation Instructions:
Installing the Door glass seal for the Morso Squirrel is extremely easy and can be completed in around 5-10 minutes.
- Remove the glass screws and place in a safe place.
- Carefully remove the glass and pull away thr old rope seal ensuring the cast is clean and ready for the new seal.
- Carefully apply the rope to the cast gently pressing the rope as you go until you have a complete loop around the inner cast.
- Carefully place the glass sitting it gently onto the new rope seal and replace the glass clips and screws being careful not to overtighten the screws to avoid the glass cracking.
|
Fire Brick Warranty Information: Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers. Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate. When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired. Bricks can still be used if cracked. As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way. Fore more information please read our full warranty and Tips guide -> CLICK HERE By placing an order for firebricks you accept these conditions. |
