Door Glass Seal Kit For The Morso Squirrel (1410/1430/1440)
The Morso Squirrel Door Glass seal is a self adhesive flat tape that is suitable for the Morso Squirrel range of stoves.. The Morso Squirrel rope seal kit provides 2 Meters of self adhesive rope and is designed to sit under the glass to provide protection of the glass and to create an airtight seal.
Installing the Door glass seal for the Morso Squirrel is extremely easy and can be completed in around 5-10 minutes.
Remove the glass screws and place in a safe place.
Carefully remove the glass and pull away thr old rope seal ensuring the cast is clean and ready for the new seal.
Carefully apply the rope to the cast gently pressing the rope as you go until you have a complete loop around the inner cast.
Carefully place the glass sitting it gently onto the new rope seal and replace the glass clips and screws being careful not to overtighten the screws to avoid the glass cracking.
We Also Recommend
You may also be interested in the following product(s)
Some of the adhesive came off onto the backing strip when I peeled it off, so that part of the tape was unusable. However there was still much more than enough tape with adhesive intact to do the job and it was simple to install.
Item was despatched promptly, well packaged (glass), good value compared to manufactureres item and the correct size with no sharp edges.
On the basis of this, my first experience of Stove Spares Ltd, i would recommend them to friends and colleagues.