Replacement Fire Brick Set For Clearview Vision 500 Smoke Control Stove (Very OLD Version)
Quality Spares at LOW prices - Stove Spares Ltd
Replacement Fire Brick Set For Clearview Vision 500 Smoke Control Stove (OLD Version)
This set of bricks is for the veryearly Smoke control version that had the big double skinned baffle plate with the air tubes at the back.
Please note: This set will not fit the newer version of the Smoke control stove. If unsure please send us photos of your stove.
Bricks Measures approx:
443mm x 209mm (Rear)
260mm x 298mm (Side)
Please Note: The Fire bricks within this set is an aftermarket set manufactured from an upgraded higher density British board to exact specificiations.
|
Fire Brick Warranty Information: Please note that due to the very nature of firebricks there are no warranties provided by the manufacturers. Fire bricks are excluded from any warranties in the same way as car brake pads would be due to the many variances that can cause these parts to deteriorate. When used correctly and carefully fire bricks can last 12 months and sometimes even longer. Please note that using the fire only a few times before the brick cracks does not mean that the brick is faulty as it may have absorbed moisture, a log may have moved during firing and hit the brick or simply been overfired. Bricks can still be used if cracked. As long as the crack is not over 6mm wide (Pound coin) then it will still insulate in the same way. Fore more information please read our full warranty and Tips guide -> CLICK HERE By placing an order for firebricks you accept these conditions. |
